I think that ONM did this... but screw it, I did my own anyway. Here's an 100% official Cubed3 Wii-mote! It's a bit bigger than the real thing, but still nice! Go pretend it's a gun! Go play Wii Tennis! Or just stick it on your desk so it looks purrdy
= = = = = = = = =
Step 1:
Save the image above, print it, then cut it out. Sorry that it's not really hi-res, but it'll do...
The only problem is that it's a bit thin. If you can use card or photo paper to print it out, that's great! Otherwise, cut it out, then use some pritt-stick to stick it to another piece of paper. Leave it to dry for a few mins. I used two bits of thick paper, and it holds pretty well.
Step 2:
Cut the smegger out. Should be nice and sturdy by now...
Step 3:
Time to fold. You need to stick the two bits together, like in the picture below I also used a knife to score lightly along the folds to make it a little easier.
Step 4:
Nearly done, just glue it together! Try doing the main big flap first, then finish with the trigger bit. It can get quite tricky, but keep trying! You want the c3 logo to overlap on the top of the battery box.
Voila, you have your own Wii-mote! Enjoy!